Difference between revisions of "Soldering to Laser Diodes"

From HoloWiki - A Holography FAQ
Jump to: navigation, search
 
m (1 revision)
 
(No difference)

Latest revision as of 22:54, 11 May 2013

Soldering a Laser Diode is a easy way to kill it!

  • The diode is very fragile.
  • Don't bend the pins, subject the diode to shock or static electricity.
  • Make sure to use a heatsink when soldering and use very thin wire for the connections.
  • Use very fine wire as the stiffness of the wire can bend a pin and break an internal wire.
  • Keep the leads from the driver to the diode short.
  • Shield as much of the wire as possible.