Page 1 of 3
RGB laser engine , with wired drivers
Posted: Sat Oct 27, 2018 12:46 pm
by holomaker
I have a select number of laser engines for sale, all three lasers WILL make a hologram..... I have provided a PayPal
Linkbelow for purchase of this little laser engine ..Now includes driver board
https://www.paypal.com/cgi-bin/webscr?c ... LQ52M4VEKA
Re: RGB laser engine , tested and pigtail wired
Posted: Sat Oct 27, 2018 12:53 pm
by holomaker
Here’s a picture of running all three laser in single mode
Re: RGB laser engine , tested and pigtail wired
Posted: Sat Oct 27, 2018 12:57 pm
by holomaker
And the engine wired and ready to work !
This engine will put out a combined power of more then
250mw !!
Re: RGB laser engine , with wired drivers
Posted: Mon Nov 05, 2018 12:11 pm
by holomaker
B0CC2C94-F63E-4761-B3FF-14F7478FBD81.jpeg
Re: RGB laser engine , with wired drivers
Posted: Mon Nov 05, 2018 12:51 pm
by holomaker
All three with nice fringes !
Re: RGB laser engine , with wired drivers
Posted: Thu Nov 08, 2018 9:50 pm
by Nnnn
Hello! I'm still an absolute beginner, so please excuse these very elememtary questions.
Around how big of a hologram can this make? Coherency lifespan? Do you have the specs of the individual lasers? I want to upgrade from the one I have from just the integraf kit and this seems almost too good to be true having all three RGB lasers on one set, and actually tiny enough for my little apartment in Japan.
I apologize for the questions but I am very interested in this. ^^
Re: RGB laser engine , with wired drivers
Posted: Mon Nov 12, 2018 12:17 pm
by holomaker
Yup as amazing as it seems all three of these lasers will make holograms! I just finished up doing another modification to make adjusting simpler!
Here’s each lasers hologram
Re: RGB laser engine , with wired drivers
Posted: Mon Nov 12, 2018 12:56 pm
by dannybee
Nice David , good unit for schools and simple single beam holos also would be good for color copy system
Re: RGB laser engine , with wired drivers
Posted: Mon Nov 12, 2018 1:03 pm
by holomaker
Again I’ll post a link below to PayPal if your interested
In one, I currently have a couple extras built, more
Drivers have been ordered, but their delivery time can be lengthy...
https://www.paypal.com/cgi-bin/webscr?c ... LQ52M4VEKA
Re: RGB laser engine , with wired drivers
Posted: Tue Nov 13, 2018 4:57 am
by Valery
Hello
What is the polarization of all three lasers?
Is everyone the same?
Valery