23 mW TEM 00 HeNe with HV supply Module
Forum rules
Finding new homes for holography-related items is encouraged. Even commercial enterprises with goods to offer are welcome as long as it is in the spirit of members helping members. If a for-sale post reads like an infomercial, though, you have probably crossed the line of acceptability.
Finding new homes for holography-related items is encouraged. Even commercial enterprises with goods to offer are welcome as long as it is in the spirit of members helping members. If a for-sale post reads like an infomercial, though, you have probably crossed the line of acceptability.
23 mW TEM 00 HeNe with HV supply Module
This JDS 1145P laser runs just on the edge of dropping out at 6.5 mA but seems OK at 7.0 mA. I am selling it at a low cost. Who needs a $750 performing laser for $250? Really...send me a message to reserve. You will need a 12 Volt, >3 Amp DC supply to drive the "brick". Phil
23 mW TEM 00 HeNe with HV supply Module
I want to buy one so I hope linear polarization?
Valery
Valery
Valery
Valery
23 mW TEM 00 HeNe with HV supply Module
Spec sheet here:smirholo wrote:I want to buy one so I hope linear polarization?
Valery
Valery
http://www.jdsu.com/productliterature/h ... _cl_ae.pdf
Steven.
23 mW TEM 00 HeNe with HV supply Module
thank you
23 mW TEM 00 HeNe with HV supply Module
Hi Valery,
The polarization is linear 500:1 like almost all modern HeNe's. The older double Brewster designs were 1000:1 with two windows. I will save this head for you and get a shipping quote. Happy Easter everyone! !
The polarization is linear 500:1 like almost all modern HeNe's. The older double Brewster designs were 1000:1 with two windows. I will save this head for you and get a shipping quote. Happy Easter everyone! !
23 mW TEM 00 HeNe with HV supply Module
Melles Griot He-Ne Laser 3230H-PC
Help to find the specifications.
Please!
Valery.
Help to find the specifications.
Please!
Valery.
23 mW TEM 00 HeNe with HV supply Module
The Hughes 3230H-PC is a polarized 10 mW laser; new they output 14 mW or so, used 11-12 is typical. It is similar to the Melles Griot LHP 991 10 mW lasers.
23 mW TEM 00 HeNe with HV supply Module
Thank, known whether the parameters which the current and voltage.
Valery.
Valery.
23 mW TEM 00 HeNe with HV supply Module
Hi Valery,
You know about Sam;'s laser FAQ right? He has all the specs under commercial HeNe heads, Hughes etc.
http://www.repairfaq.org/sam/laserfaq.htm
Output Beam Diver- Mode Operating Tube Plasma Laser Power
Power Diam gence Spacing Voltage Current Tube Head Supply
10 mW .68 mm 1.20 mR 350 MHz 2.80 kV 7.0 mA 3230/P
The right Melles Griot suppli is a 915-070 (7 mA)
You know about Sam;'s laser FAQ right? He has all the specs under commercial HeNe heads, Hughes etc.
http://www.repairfaq.org/sam/laserfaq.htm
Output Beam Diver- Mode Operating Tube Plasma Laser Power
Power Diam gence Spacing Voltage Current Tube Head Supply
10 mW .68 mm 1.20 mR 350 MHz 2.80 kV 7.0 mA 3230/P
The right Melles Griot suppli is a 915-070 (7 mA)
23 mW TEM 00 HeNe with HV supply Module
Many thanks.
now I know what to do.
now I know what to do.