Page 2 of 3
coherent 215m-10 laser with controller
Posted: Tue Oct 20, 2009 11:14 am
by 142laser
The laser loks nice Dave. The head heat sink is great; no fan required. The controller should also have a heatsink and hat is why I am going to just mount both parts with the short cable together on one nice large heatsink. It will look cool and it is easy.
Phil, 142laser
coherent 215m-10 laser with controller
Posted: Tue Oct 20, 2009 11:35 am
by dave battin
the controller runs a little warm, i have never had my 315's controller on a heat sink, i put this unit on rubber feet to allow some convection.
the large sticker on the controller says "mount laser head to heat sink"........... i guess the proof will be in the pudding when i make a hologram with it
coherent 215m-10 laser with controller
Posted: Tue Oct 20, 2009 12:04 pm
by 142laser
It is a good idea to heatsink the controller as well especially on higher power systems like 315M's but the head is far more critical.
coherent 215m-10 laser with controller
Posted: Tue Oct 20, 2009 4:46 pm
by dave battin
here is a quick video of a test shot i did using the coherent 215m laser. the total depth in this test shot is more than 45 inches deep! one can easily see the third microscope objective in the forground @ 36 inches and then beyond that ! :whistle:
coherent 215m-10 laser with controller
Posted: Wed Oct 21, 2009 3:02 am
by dave battin
i forgot to mention the set up for this hologram, its a one beam transmission shot with fuji film and i used only two mirrors (one concave),to make this .........
coherent 215m-10 laser with controller
Posted: Wed Oct 21, 2009 5:55 am
by The_Stranger
Wow, nice hologram..
On a sidenote, do not hesitate to buy from Dave, I bought a HeNe laser from him and he's been more than helpful. (if only the postalservice and customs were as quick as he was, I could have been playing with it allready..
)
coherent 215m-10 laser with controller
Posted: Fri Oct 23, 2009 9:35 pm
by pietroc
Hi Dave,
I thought you would be contacting me through email ?
best regards,
Pietro
coherent 215m-10 laser with controller
Posted: Sun Oct 25, 2009 5:44 pm
by dave battin
pietroc wrote:Hi Dave,
I thought you would be contacting me through email ?
best regards,
Pietro
Sorry Pietroc this unit has been sold locally. I have now two more units and one is an OEM version (@30 mw @532),with a mile of coherent length and very stable, (will be making hologram test tonight) and the other one i may hold onto, as i sold my backup 315 to Jody Burns ,now he can use that stock pile of green slavach plates he has(leftovers from his argon days)!
coherent 215m-10 laser with controller
Posted: Mon Oct 26, 2009 8:46 am
by dave battin
ok , just a follow-up on the 30mw unit. its putting out 35mw and i was able to easly shoot a two meter deep one beam transmission hologram. :dance:
So to recap this unit will include laser head, controller both with heatsinks, and matched powersupply $375 (plus shipping). If this unit is wanted, dont hesitate as when i list it on Ebay(in a few days), ill be asking an additonal $50
coherent 215m-10 laser with controller
Posted: Mon Oct 26, 2009 3:29 pm
by dave battin
the 30 mw unit was sold .....................
