Holographyforum.org / holowiki.org

Hi:

This should be a cream puff:

C315M-150 laser head, Analog controller, Coherent Autostart, short (8") umbilical, and DC power supply. Output power is
greater than 175 mW. It also comes with an adjustable beam splitter (rotatable wave plate + PBS cube), 3 manual shutters,
1 unpolarized beam splitter cube and 2 adjustable mirrors (similar to MM-1), and 3 beam expanders all set up for 2" beam height.

The C315M is already the Cadillac, Lexus, or Porsche (depending on your preference!) in medium power green holography lasers,
and the -150 makes it even more attractive!

I'm listing this for someone I trust. Will update with photos when I get them.

$3,000, slightly negotiable.

Thanks!

--- sam

Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm

Would it be much trouble to extend the umbilical? Could the umbilical from another 315 be exchanged easily?

As promised, here are some photos of this fabulous C315M-150 system:


<br>

<br>

<br>


The accessories are (from left to right)

• 3 manual beam shutters (1 is in the beam path)
  3 beam expanders (not telescopes - these create a diverging beam)
  1 adjustable beam splitter (rotatable waveplate + PBS cube)
  1 50:50 non polarizing beam splitter cube
  2 mirrors on kinematic mounts

(Instrumentation NOT included!)

A full length umbilical is available for $50 extra.

All accessories and the laser head are set up for a 2.0" beam height.

--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

lasersam wrote:(Instrumentation NOT included!)

Nice power meter!
Wow, what a laser for holography!