Hi:
I have a complete C315M-100 532 nm system available:
1 Coherent C315M-100 laser head in excellent condition on heatsink, low
diode current and percent current limit.
1 Coherent C315M-100 Analog Controller.
1 Coherent umbilical cable.
1 Autostart widget.
1 Open frame multi-output DC power supply with AC power cord and DC power
cable. The laser runs on +12 VDC. +24 VDC and +5 VDC also available
for other uses. Input is 115 VAC.
The only other thing needed would be a heatsink for the controller.
Almost any sort of aluminum plate would suffice since everything runs cool.
The laser head is one that I had selected best health among all those I'd tested
over the years. So, it should be like new.
$2,000 + insured shipping. USA only.
Reply here or via the Feedback Form at the S.E.R Web sites.
--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html
C315M-100 system for sale
C315M-100 system for sale
Hi!
I'm looking for a C315M-100 as a replacement in a Computer To Plate system.
Please let me know if the payment can be made by MC or VISA.
This should be shipped to NY.
Let me know something about warranty if any.
Waiting !
Iustin Andronie
ia220@spiruharet.ro
I'm looking for a C315M-100 as a replacement in a Computer To Plate system.
Please let me know if the payment can be made by MC or VISA.
This should be shipped to NY.
Let me know something about warranty if any.
Waiting !
Iustin Andronie
ia220@spiruharet.ro
C315M-100 system for sale
lasersam wrote:Hi:
I have a complete C315M-100 532 nm system available:
1 Coherent C315M-100 laser head in excellent condition on heatsink, low
diode current and percent current limit.
1 Coherent C315M-100 Analog Controller.
1 Coherent umbilical cable.
1 Autostart widget.
1 Open frame multi-output DC power supply with AC power cord and DC power
cable. The laser runs on +12 VDC. +24 VDC and +5 VDC also available
for other uses. Input is 115 VAC.
The only other thing needed would be a heatsink for the controller.
Almost any sort of aluminum plate would suffice since everything runs cool.
The laser head is one that I had selected best health among all those I'd tested
over the years. So, it should be like new.
$2,000 + insured shipping. USA only.
Reply here or via the Feedback Form at the S.E.R Web sites.
--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html
this is actually a perfect C315M-100 system setup, maybe i can check this later
_________________
aluminum plate
C315M-100 system for sale
Hello all!
I have a 315M-100 head with analog controller for sale:
-> http://c4r0.skrzynka.org/compass_h.jpg
-> http://www.youtube.com/watch?v=LNgoZQIV6tI
It has been working in a computer-to-plate system.
For sell is:
- Coherent 315M-100 laser head (without heatsink)
- Analog controller
- head-controller cable
- autostart adapter made by me
Price: 1000 USD + shipping
I don't know how much will be for shipping (it will be shipped from Poland), If someone is interested in buying this stuff then I will check it. I know that I have no reputation in your community (it's my first post here actually ) but I thought there is no harm in letting you know that I have that laser for sell If somebody is interested in buying it I can put in on ebay.
This stuff needs 16-24VDC 200W power supply to run (I used 2x ATX power supply with 12V connected in series) - not included. Both head and controller must be placed on heatsinks!
I have a 315M-100 head with analog controller for sale:
-> http://c4r0.skrzynka.org/compass_h.jpg
-> http://www.youtube.com/watch?v=LNgoZQIV6tI
It has been working in a computer-to-plate system.
For sell is:
- Coherent 315M-100 laser head (without heatsink)
- Analog controller
- head-controller cable
- autostart adapter made by me
Price: 1000 USD + shipping
I don't know how much will be for shipping (it will be shipped from Poland), If someone is interested in buying this stuff then I will check it. I know that I have no reputation in your community (it's my first post here actually ) but I thought there is no harm in letting you know that I have that laser for sell If somebody is interested in buying it I can put in on ebay.
This stuff needs 16-24VDC 200W power supply to run (I used 2x ATX power supply with 12V connected in series) - not included. Both head and controller must be placed on heatsinks!
C315M-100 system for sale
Hello! My 315M system is still for sale. I will probably be in California in June/July, anyone interested in local pickup?