Newest Idea
Posted: Wed Jun 09, 2004 9:37 am
Ok, I have always wanted to do a fish tank that could be placed on the wall and looked like the tank was built into the wall. I think I have seen this before. But I have a fresh idea on the image. How about if once the hologram of the fish and coral and rocks are done that holographic plate is used at the front glass of a tank that holds water but is only 1/2 inch deep. Then in this small cavity behind the hologram you fill with water and introduce a couple of exhausts of air bubbles. The holographic tank coupled with the real moving air bubbles would give a great effect with nice depth but would still only be less then an inch thick and would be maintenance free except for the occasional addition of water. An aerator shown on the side would provide the bubbles and then entire holotank and aerator would be encased in a frame such that the aerator is not visible.
Lighting, ohhhh, the options of lighting could be increadible and designed into the back or sides of the frame also.
NOTE: the tank in the photo was burrowed from http://sandrasdecor.com/new/mailboxes/1 ... %20orders/
Lighting, ohhhh, the options of lighting could be increadible and designed into the back or sides of the frame also.
NOTE: the tank in the photo was burrowed from http://sandrasdecor.com/new/mailboxes/1 ... %20orders/